851 Titrando

Coulometer including generator electrode with or without diaphragm and 801 Magnetic Stirrer. Recommended measuring range: 10 µg – 200 mg absolute water. For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.

852 Titrando

Coulometer including generator electrode with or without diaphragm, 801 Magnetic Stirrer, and complete volumetric titration cell. For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.

852 Titrando

Coulometer including generator electrode with or without diaphragm, 801 Magnetic Stirrer, and complete volumetric titration cell. For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.

860 KF Thermoprep

Thanks to the heated outlet tubing the released moisture is transferred quantitatively to the titration cell. As an option, there is the possibility to modify the oven of the 860 KF Thermoprep in such a way that you can use not only the Metrohm standard sample vials but also those used in your production plant.

874 Oven Sample Processor

Like the titrator, this automated sample processor is controlled with the tiamo software or OMNIS Software. This enables you, for instance, to record the heating curve of an unknown sample to determine the optimum temperature for the analysis. Moreover, with this instrument, you can automate reagent exchange and thus make your work safer, as you don’t get in contact with the toxic reagent.

875 KF Gas Analyzer

Fully automated solution for the determination of trace levels of water in liquefied and permanent gases.

890 Titrando with Touch Control

The 890 Titrando is a high-end titrator for volumetric Karl Fischer titrations. The instrument is equipped with a built-in buret drive, four MSB connectors, a galvanically separated measuring interface and a USB connector. The Touch Control operating unit with touch-sensitive screen for controlling the Titrando, the 803 Ti Stand and a 10 mL exchange unit are included in the scope of delivery.

901 Titrando

In addition to the Karl Fischer mode (KFT), the high-end titrator is also equipped with the SET mode and can thus perform titrations to a predefined endpoint. “iTrode ready”: it is additionally possible to perform pH measurements. Thanks to the four MSB connectors, up to four Dosinos can be connected to the 901 Titrando. For use with OMNIS Software, tiamo software, or Touch Control unit. Compliance with GMP/GLP and FDA regulations such as 21 CFR Part 11, if required.

915 KF Ti-Touch

“Reduce to the max” – that is the concept behind the 915 KF Ti-Touch. Burets, stirrer, dosing unit and Touch Control are integrated in a single, compact system unit. The 915 KF Ti-Touch now also fulfills FDA Regulation 21 CFR, Part 11. The package includes the 915 KF Ti-Touch, an 800 Dosino, a 10 mL dosing unit and additional accessories.

917 Coulometer

With generator electrode with or without diaphragm. ”Reduced to the max” – operating module, stirrer and pump are integrated in the 917 Coulometer for rapid reagent replacement. Fulfills FDA Regulation 21 CFR, Part 11.