ADP-344

Heat Extractor for Sugar Samples. The ideal solution sugary samples: This mantel heater for volumetric Karl Fischer titration cells ensures the complete extraction of the moisture content of samples like chocolates, caramels and other samples containing sugars.

ADP-512

Evaporator for Ores. This oven is designed to use with KEM Karl Fischer moisture titrator for measurement of combined water in iron ores according to JIS M8211 Iron Ores – Method for Determination of Combined Water Content.

ADP-512S

Evaporator for High Temperature. This oven evaporates moisture in ores, metallic powder, ceramics and other solids and powder materials by high heat (maximum: 1000℃) for measurement of water content connected to Karl Fischer moisture titrator.

ADP-513

Evaporator for Oil Samples. This unit evaporates moisture of samples dissolved in a heated base oil. This unit is primarily used for moisture measurements in lubricant oil, grease, tar products, paints and other viscous liquids.

ADP-611

Drying oven for moisture measurement on chip, particulate or powder samples such as plastic pellets. Maximum set temperature: 300℃.

AQUA 40.00 Vario / AQUA 40.00 Vario PLUS

Water determination with headspace method (up to 300°C); according to standard ASTM D 6304; system with closed circuit of the extraction gas (no external carrier gas necessary); for solid, pasty, liquid samples; formula generator for individual result output; manual version and PLUS version with autosampler (can be retrofitted); suitable furnace inserts/sample plates depending on vial size; connection for balance; can be coupled with HT 1300 high-temperature oven (300 to 1300°C); universal reagent exchange module SWOP Box can be connected.

Aquamax KF Online

Continuous water determination in oils; system with closed circuit of the extraction gas (no external carrier gas necessary); no oils in the titration cell; minimised side reactions due to additives and sulphur due to heating procedure; direct coupling to the process to be monitored; typical measuring time 2 to 5 min; heating temperature: 35 to 250°C; measuring range: > 0.1 ppm.

Aquamax KF Plus

Water determination in liquids by direct injection into the titration cell; complies with ASTM, API, BS, DIN, EI/IP, ISO standards; optionally with transport case; easy operation; measuring range 1 ppm / 100%; battery operation; integrated printer; small footprint.

Aquamax KF PRO LPG

Water determination in gases and LPG according to ASTM D 7995; titration system combined with automatic dosing module; completely automated measuring procedure incl. purging steps; for liquefied and gaseous samples; sulphur trap prevents side reactions caused by sulphides/H2S/mercaptans; no separate purging gas necessary; up to 250 measurements in 48 h; measuring range 1 ppm to 10%; typical measuring time 5 to 15 min; automated sample feeding of liquefied gases via optional LPG Selection Box.

Aquamax KF PRO Oil

Karl Fischer titration combined with gas extraction furnace for water determination in oils according to ASTM D 6304; system with closed circuit of the extraction gas (no external carrier gas necessary); no oils in the titration cell; manual version and AUTOMATIC version with autosampler for 200 syringes; minimised side reactions due to additives and sulphur due to heating procedure; no blank value; connection for balance; typical measuring time 2 to 5 min; heating temperature: 35 to 250°C; measuring range: 0.0001 to 100%.